10 years agoadd XMV demuxer
Sven Hesse [Tue, 16 Aug 2011 19:26:45 +0000 (21:26 +0200)]
add XMV demuxer

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agormdec: parse FPS in RealMedia properly
Kostya Shishkov [Tue, 16 Aug 2011 07:10:57 +0000 (09:10 +0200)]
rmdec: parse FPS in RealMedia properly

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoUse parsers for RealVideo 3/4 to determine correct PTS
Kostya Shishkov [Mon, 15 Aug 2011 10:03:40 +0000 (12:03 +0200)]
Use parsers for RealVideo 3/4 to determine correct PTS

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agormdec: correct DTS calculation in RealMedia container.
Kostya Shishkov [Thu, 11 Aug 2011 12:44:05 +0000 (14:44 +0200)]
rmdec: correct DTS calculation in RealMedia container.

First, container stores only DTS and not PTS as it was believed.
Second, multiple frames in a packet store timestamp instead of position
after the frame length.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agorv10/20: tell decoder to use edge emulation
Kostya Shishkov [Wed, 17 Aug 2011 08:36:33 +0000 (10:36 +0200)]
rv10/20: tell decoder to use edge emulation

This removes out-of-edge motion compensation artifacts (easily spotted green
blocks in avplay, gray blocks in transcoding), for example here:

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agoRevert "avconv: use stream copy by default when possible."
Anton Khirnov [Tue, 16 Aug 2011 18:59:14 +0000 (20:59 +0200)]
Revert "avconv: use stream copy by default when possible."

This reverts commit 4f4f33844a7369e5579912cc02f3c5376b1e6872.

This commit has some ugly corner cases and needs to be discussed

10 years agoavconv: print stream copy information.
Anton Khirnov [Tue, 16 Aug 2011 04:58:52 +0000 (06:58 +0200)]
avconv: print stream copy information.

10 years agoavconv: use stream copy by default when possible.
Anton Khirnov [Sat, 13 Aug 2011 06:37:13 +0000 (08:37 +0200)]
avconv: use stream copy by default when possible.

10 years agomatroskaenc: vertical alignment.
Anton Khirnov [Tue, 16 Aug 2011 04:52:50 +0000 (06:52 +0200)]
matroskaenc: vertical alignment.

10 years agomatroskaenc: implement query_codec()
Anton Khirnov [Thu, 11 Aug 2011 18:35:46 +0000 (20:35 +0200)]
matroskaenc: implement query_codec()

10 years agolavf: add avformat_query_codec().
Anton Khirnov [Thu, 11 Aug 2011 18:34:45 +0000 (20:34 +0200)]
lavf: add avformat_query_codec().

It allows to check if a given codec can be written into a container.

10 years agolavc: add avcodec_get_type() for mapping codec_id -> type.
Anton Khirnov [Thu, 11 Aug 2011 15:45:50 +0000 (17:45 +0200)]
lavc: add avcodec_get_type() for mapping codec_id -> type.

10 years agoflvenc: use int64_t to store offsets
Luca Barbato [Wed, 8 Jun 2011 14:32:07 +0000 (14:32 +0000)]
flvenc: use int64_t to store offsets

Metadata currently is written only at the start of the file in normal
cases, when transcoding from a rtmp source metadata could be
written later and the offset recorded can exceed 32bit.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoavconv: don't segfault on 0 input files.
Anton Khirnov [Tue, 16 Aug 2011 09:32:57 +0000 (11:32 +0200)]
avconv: don't segfault on 0 input files.

10 years agoDo not write ID3v1 tags by default
Diogo Franco [Tue, 16 Aug 2011 09:43:23 +0000 (09:43 +0000)]
Do not write ID3v1 tags by default

ID3v1 are legacy tags with several limitations; furthermore
avconv/ffmpeg writes the tags in UTF-8 which probably has near-0
software support.

Add a -write_id3v1 option to be able to turn it on; disabled by default.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agompegts: log into an AVFormatContext rather than MpegTSContext.
Alex Converse [Tue, 16 Aug 2011 01:14:12 +0000 (18:14 -0700)]
mpegts: log into an AVFormatContext rather than MpegTSContext.

MpegTSContext's AVClass member can be NULL.

10 years agomovenc: change AV_LOG_INFO to AV_LOG_WARNING for some warnings
Anton Khirnov [Thu, 11 Aug 2011 14:33:03 +0000 (16:33 +0200)]
movenc: change AV_LOG_INFO to AV_LOG_WARNING for some warnings

10 years agoavconv: remove a write-only variable
Anton Khirnov [Mon, 15 Aug 2011 16:26:56 +0000 (18:26 +0200)]
avconv: remove a write-only variable

10 years agoavconv: remove pointless parameter from new_*_stream().
Anton Khirnov [Sat, 13 Aug 2011 06:23:44 +0000 (08:23 +0200)]
avconv: remove pointless parameter from new_*_stream().

New streams are always added to the last output file.

10 years agoavconv: cosmetics, move code
Anton Khirnov [Sat, 13 Aug 2011 06:08:13 +0000 (08:08 +0200)]
avconv: cosmetics, move code

Move find_codec_or_die(), choose_codec(), new_output_stream() and
read_avserver_streams() below transcode() where they belong.

10 years agoavconv: cosmetics -- move copy_chapters().
Anton Khirnov [Sat, 13 Aug 2011 05:56:38 +0000 (07:56 +0200)]
avconv: cosmetics -- move copy_chapters().

It's only used in opt_output_file(), so move it right above

10 years agoavconv: cosmetics -- move parse_forced_key_frames().
Anton Khirnov [Sat, 13 Aug 2011 05:55:04 +0000 (07:55 +0200)]
avconv: cosmetics -- move parse_forced_key_frames().

parse_forced_key_frames() is only used in new_video_stream(), so move it
right above new_video_stream().

10 years agolavc: add audio flag to the 'b' option, deprecate 'ab'.
Anton Khirnov [Tue, 9 Aug 2011 11:56:36 +0000 (13:56 +0200)]
lavc: add audio flag to the 'b' option, deprecate 'ab'.

Its only reason for its existence was ffmpeg's inability to properly assign
AVOptions to streams. Now this is not a problem anymore, so 'ab' should

10 years agoavconv: rename sameq to same_quant
Anton Khirnov [Tue, 9 Aug 2011 09:32:16 +0000 (11:32 +0200)]
avconv: rename sameq to same_quant

It's often mistakenly used as 'same quality', emphasize that it's not
true in the manual.

10 years agodoc/avconv: add forgotten end of chapter.
Anton Khirnov [Tue, 9 Aug 2011 09:05:04 +0000 (11:05 +0200)]
doc/avconv: add forgotten end of chapter.

10 years agoChangelog: document avconv incompatibilities with ffmpeg.
Anton Khirnov [Fri, 29 Jul 2011 12:17:01 +0000 (14:17 +0200)]
Changelog: document avconv incompatibilities with ffmpeg.

10 years agoavconv: replace -vcodec/-acodec/-scodec with a better system.
Anton Khirnov [Mon, 8 Aug 2011 12:29:37 +0000 (14:29 +0200)]
avconv: replace -vcodec/-acodec/-scodec with a better system.

The new option doesn't depend on its placement wrt -new* options (which
don't exist anymore) and works in a similar way as per-stream AVOptions.

-[vas]codec remain as aliases to -codec:[vas]

10 years agoavconv: remove presets.
Anton Khirnov [Fri, 12 Aug 2011 17:19:19 +0000 (19:19 +0200)]
avconv: remove presets.

Nothing except x264 uses them and native x264 presets should be used
with private options.

10 years agosvq3: propagate codec memory allocation failure in context init
Dustin Brody [Fri, 12 Aug 2011 16:05:46 +0000 (12:05 -0400)]
svq3: propagate codec memory allocation failure in context init

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoFix NASM include directive
Dave Yeo [Sun, 14 Aug 2011 18:46:18 +0000 (11:46 -0700)]
Fix NASM include directive

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agodsputil_mmx: Honor HAVE_AMD3DNOW
Alex Converse [Sun, 14 Aug 2011 03:02:37 +0000 (20:02 -0700)]
dsputil_mmx: Honor HAVE_AMD3DNOW

10 years agolavf,lavd: remove all usage of AVFormatParameters from demuxers.
Anton Khirnov [Sun, 17 Jul 2011 05:45:33 +0000 (07:45 +0200)]
lavf,lavd: remove all usage of AVFormatParameters from demuxers.

AVFormatParameters are converted into corresponding private options in
av_open_input_file/stream() compat wrappers, so accessing them from
demuxers is redundant.

10 years agojack: add 'channels' private option.
Anton Khirnov [Sun, 17 Jul 2011 06:08:57 +0000 (08:08 +0200)]
jack: add 'channels' private option.

Get rid of AVFormatParameters usage.

10 years agoVC-1: fix reading of custom PAR.
Reimar Döffinger [Sat, 13 Aug 2011 09:58:18 +0000 (11:58 +0200)]
VC-1: fix reading of custom PAR.

Custom PAR num/denum are in 1-256 range.

Signed-off-by: Reimar Döffinger <Reimar.Doeffinger@gmx.de>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agoRemove redundant and dubious video codec detection by its extradata
Kostya Shishkov [Sun, 14 Aug 2011 18:02:26 +0000 (20:02 +0200)]
Remove redundant and dubious video codec detection by its extradata

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agompeg12: remove repeat-field code disabled since May 2002
Dustin Brody [Fri, 12 Aug 2011 05:30:20 +0000 (01:30 -0400)]
mpeg12: remove repeat-field code disabled since May 2002

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agopatch checklist: suggest fate instead of regression tests
Michael Niedermayer [Sat, 9 Apr 2011 10:50:03 +0000 (10:50 +0000)]
patch checklist: suggest fate instead of regression tests

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoTurn on resampling on sudden size change instead of bailing out during recode.
Kostya [Sat, 13 Aug 2011 16:44:21 +0000 (16:44 +0000)]
Turn on resampling on sudden size change instead of bailing out during recode.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoavtools: reinitialise filter chain when input video stream changes dimensions
Kostya [Sat, 13 Aug 2011 16:44:04 +0000 (16:44 +0000)]
avtools: reinitialise filter chain when input video stream changes dimensions

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoaacenc: Fix number of coefficients used in a LFE channel.
Nathan Caldwell [Fri, 29 Jul 2011 20:49:04 +0000 (14:49 -0600)]
aacenc: Fix number of coefficients used in a LFE channel.

The spec states:

 *  Only the lowest 12 spectral coefficients of any LFE may be non-zero

We were using the 12 lowest *bands*.

10 years agoaacenc: Fix a segfault with grouped psymodel.
Nathan Caldwell [Sat, 23 Jul 2011 07:19:34 +0000 (01:19 -0600)]
aacenc: Fix a segfault with grouped psymodel.

10l: Forgot about TYPE_LFE being after TYPE_CPE. Which causes a
segfault when encoding 5.1

10 years agoswscale: add dithering to yuv2yuvX_altivec_real
Luca Barbato [Wed, 10 Aug 2011 00:16:26 +0000 (02:16 +0200)]
swscale: add dithering to yuv2yuvX_altivec_real

It just does that part in scalar form, I doubt using a vector store
over 2 array would speed it up particularly.

The function should be written to not use a scratch buffer.

10 years agorv34: free+allocate buffer instead of reallocating it to preserve alignment
Kostya Shishkov [Fri, 12 Aug 2011 19:50:28 +0000 (21:50 +0200)]
rv34: free+allocate buffer instead of reallocating it to preserve alignment

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoh264: add missing brackets.
Ronald S. Bultje [Fri, 12 Aug 2011 19:32:31 +0000 (12:32 -0700)]
h264: add missing brackets.

This caused failure of a few fate tests.

10 years agoswscale: use 15-bit intermediates for 9/10-bit scaling.
Ronald S. Bultje [Tue, 2 Aug 2011 22:42:35 +0000 (15:42 -0700)]
swscale: use 15-bit intermediates for 9/10-bit scaling.

10 years agoMove x86util.asm from libavcodec/ to libavutil/.
Ronald S. Bultje [Wed, 3 Aug 2011 16:48:08 +0000 (09:48 -0700)]
Move x86util.asm from libavcodec/ to libavutil/.

This allows using it in swscale also.

10 years agoMove x86inc.asm to libavutil/.
Ronald S. Bultje [Sun, 24 Jul 2011 01:36:35 +0000 (18:36 -0700)]
Move x86inc.asm to libavutil/.

This allows using it in libswscale/ also.

10 years agoAPIchanges: note error_recognition in lavf
Dustin Brody [Sat, 6 Aug 2011 05:42:35 +0000 (01:42 -0400)]
APIchanges: note error_recognition in lavf

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agolavf: add support for error_recognition, use it in avidec, and bump minor API version
Dustin Brody [Sat, 6 Aug 2011 04:42:34 +0000 (04:42 +0000)]
lavf: add support for error_recognition, use it in avidec, and bump minor API version

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoavconv: change semantics of -map
Anton Khirnov [Fri, 29 Jul 2011 13:21:51 +0000 (15:21 +0200)]
avconv: change semantics of -map

New syntax contains an optional stream type, allowing to refer to n-th
stream of specific type.

Omitting stream number now maps all streams of the given type.

10 years agoavconv: get rid of new* options.
Anton Khirnov [Fri, 29 Jul 2011 06:36:13 +0000 (08:36 +0200)]
avconv: get rid of new* options.

They are confusing, irregular and redundant -- -map already contains all
the information.  Stream maps can now be parsed in opt_output_file().

Add a more user-friendly default behavior in case no maps are present.

Breaks -programid for now, but it never worked properly anyway. A better
solution will be written soon.

10 years agocmdutils: allow precisely specifying a stream for AVOptions.
Anton Khirnov [Thu, 28 Jul 2011 14:47:38 +0000 (16:47 +0200)]
cmdutils: allow precisely specifying a stream for AVOptions.

10 years agoconfigure: add missing CFLAGS to fix building on the HURD
Pino Toscano [Fri, 12 Aug 2011 12:11:21 +0000 (14:11 +0200)]
configure: add missing CFLAGS to fix building on the HURD

Signed-off-by: Reinhard Tartler <siretart@tauware.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agolibx264: Include hint for possible values for configuring libx264
Reinhard Tartler [Tue, 9 Aug 2011 12:44:12 +0000 (14:44 +0200)]
libx264: Include hint for possible values for configuring libx264

The output of the x264 commandline tool contains the most uptodate
description of the possible values for the -preset, -tune and -profile

10 years agocmdutils: allow ':'-separated modifiers in option names.
Anton Khirnov [Fri, 29 Jul 2011 11:47:37 +0000 (13:47 +0200)]
cmdutils: allow ':'-separated modifiers in option names.

10 years agoavconv: make -map_metadata work consistently with the other options
Anton Khirnov [Fri, 29 Jul 2011 11:07:27 +0000 (13:07 +0200)]
avconv: make -map_metadata work consistently with the other options

Before, it took an input and output file index, now it only takes an
input file and applies to the next output file.

Stream/chapter/program specification is now part of the option name and
the delimiter was changed from ',' to ':' to be consistent with the
similar feature for AVOptions.

10 years agoavconv: remove deprecated options.
Anton Khirnov [Thu, 28 Jul 2011 10:57:24 +0000 (12:57 +0200)]
avconv: remove deprecated options.

10 years agoavconv: make -map_chapters accept only the input file index.
Anton Khirnov [Wed, 27 Jul 2011 19:39:12 +0000 (21:39 +0200)]
avconv: make -map_chapters accept only the input file index.

This is consistent with how all the other options work.

10 years agoMake a copy of ffmpeg under a new name -- avconv.
Anton Khirnov [Wed, 27 Jul 2011 18:56:59 +0000 (20:56 +0200)]
Make a copy of ffmpeg under a new name -- avconv.

It will be further developed with a few incompatible changes.

ffmpeg.c will stay as is for some time, so any scripts using it won't be

10 years agoffmpeg: add a warning stating that the program is deprecated.
Anton Khirnov [Wed, 27 Jul 2011 19:04:26 +0000 (21:04 +0200)]
ffmpeg: add a warning stating that the program is deprecated.

10 years agoAdd weighted motion compensation for RV40 B-frames
Kostya Shishkov [Wed, 10 Aug 2011 09:26:39 +0000 (11:26 +0200)]
Add weighted motion compensation for RV40 B-frames

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoRV3/4: calculate B-frame motion weights once per frame
Kostya Shishkov [Wed, 10 Aug 2011 09:26:24 +0000 (11:26 +0200)]
RV3/4: calculate B-frame motion weights once per frame

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoMove RV3/4-specific DSP functions into their own context
Kostya Shishkov [Tue, 9 Aug 2011 09:00:09 +0000 (11:00 +0200)]
Move RV3/4-specific DSP functions into their own context

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agomjpeg: propagate decode errors from ff_mjpeg_decode_sos and ff_mjpeg_decode_dqt
Dustin Brody [Thu, 11 Aug 2011 15:16:09 +0000 (11:16 -0400)]
mjpeg: propagate decode errors from ff_mjpeg_decode_sos and ff_mjpeg_decode_dqt

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoh264: notice memory allocation failure
Dustin Brody [Thu, 11 Aug 2011 12:57:58 +0000 (08:57 -0400)]
h264: notice memory allocation failure

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoac3enc: add macros for option names to make them more understandable.
Justin Ruggles [Tue, 9 Aug 2011 22:11:08 +0000 (18:11 -0400)]
ac3enc: add macros for option names to make them more understandable.

10 years agoac3enc: fix 'channel_coupling' option to actually allow 'auto'.
Justin Ruggles [Wed, 10 Aug 2011 14:21:10 +0000 (10:21 -0400)]
ac3enc: fix 'channel_coupling' option to actually allow 'auto'.

Use 'auto' as the default value.

10 years agocavs: fix some crashes with invalid bitstreams
Mans Rullgard [Wed, 10 Aug 2011 17:52:11 +0000 (18:52 +0100)]
cavs: fix some crashes with invalid bitstreams

This removes all valgrind-reported invalid writes with one
specific test file.

Fixes http://www.ocert.org/advisories/ocert-2011-002.html

Signed-off-by: Mans Rullgard <mans@mansr.com>
10 years agoac3enc: clip coupling coordinates during calculation
Justin Ruggles [Sun, 7 Aug 2011 21:12:49 +0000 (17:12 -0400)]
ac3enc: clip coupling coordinates during calculation

This is faster than using the clip_coefficients() function. Also,
clipping the coordinates before determining reuse is better since it
will compare coordinates that are closer to their final encoded values.

10 years agoRemove incorrect info in documentation of AVCodecContext.bits_per_raw_sample.
Justin Ruggles [Wed, 10 Aug 2011 18:07:35 +0000 (14:07 -0400)]
Remove incorrect info in documentation of AVCodecContext.bits_per_raw_sample.

bits_per_raw_sample is used in video as well, where sample_fmt is not used.

10 years agolavc: fix parentheses placement in avcodec_open2().
Baptiste Coudurier [Tue, 9 Aug 2011 06:41:50 +0000 (23:41 -0700)]
lavc: fix parentheses placement in avcodec_open2().

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agolavc: make avcodec_init() static on next bump.
Anton Khirnov [Wed, 10 Aug 2011 07:50:00 +0000 (09:50 +0200)]
lavc: make avcodec_init() static on next bump.

It's called from avcodec_register() anyway, so there's no reason for it
to be public.

10 years agoac3enc: remove unneeded #include
Justin Ruggles [Sun, 7 Aug 2011 21:09:47 +0000 (17:09 -0400)]
ac3enc: remove unneeded #include

10 years agoac3enc: restructure coupling coordinate reuse calculation
Justin Ruggles [Fri, 5 Aug 2011 21:34:53 +0000 (17:34 -0400)]
ac3enc: restructure coupling coordinate reuse calculation

10 years agoac3enc: allow new coupling coordinates to be sent independently for each
Justin Ruggles [Fri, 5 Aug 2011 20:28:39 +0000 (16:28 -0400)]
ac3enc: allow new coupling coordinates to be sent independently for each

10 years agoac3enc: separate exponent bit counting from exponent grouping.
Justin Ruggles [Fri, 5 Aug 2011 20:00:18 +0000 (16:00 -0400)]
ac3enc: separate exponent bit counting from exponent grouping.

Move bit counting to the bit allocation function. Move exponent grouping to
after bit allocation. This will allow for adjustment of bandwidth parameters
during bit allocation without having to do exponent grouping multiple times.

10 years agoh264: propagate error return values for AV_LOG_ERROR-triggering events
Dustin Brody [Thu, 4 Aug 2011 21:47:16 +0000 (17:47 -0400)]
h264: propagate error return values for AV_LOG_ERROR-triggering events

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoaac: Don't attempt to output configure an invalid channel configuration.
Alex Converse [Fri, 5 Aug 2011 19:40:51 +0000 (12:40 -0700)]
aac: Don't attempt to output configure an invalid channel configuration.

10 years agoRename ffserver to avserver.
Anton Khirnov [Tue, 26 Jul 2011 19:56:56 +0000 (21:56 +0200)]
Rename ffserver to avserver.

10 years agoRename ffprobe to avprobe.
Anton Khirnov [Tue, 26 Jul 2011 17:04:43 +0000 (19:04 +0200)]
Rename ffprobe to avprobe.

10 years agoRename ffplay to avplay.
Anton Khirnov [Tue, 26 Jul 2011 15:51:34 +0000 (17:51 +0200)]
Rename ffplay to avplay.

10 years agoPretty-print RV3/4 decoder source
Kostya Shishkov [Tue, 9 Aug 2011 09:19:55 +0000 (11:19 +0200)]
Pretty-print RV3/4 decoder source

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agoSaner RV1/2 initialisation and RV2 header parsing.
Kostya Shishkov [Thu, 4 Aug 2011 19:00:12 +0000 (21:00 +0200)]
Saner RV1/2 initialisation and RV2 header parsing.

Old version was based on lots of guesswork which had different hacks based on
32-bit version field instead of splitting it into major/minor/micro version.
RV2 picture header parser also had a few places where it deviated from binary

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agolibx264: do not set pic quality if no frame is output
Baptiste Coudurier [Sun, 30 Jan 2011 01:05:42 +0000 (17:05 -0800)]
libx264: do not set pic quality if no frame is output

Avoids uninitialized reads.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agolibx264: add preset, tune, profile and fastfirstpass private options
Baptiste Coudurier [Sat, 16 Apr 2011 23:50:50 +0000 (16:50 -0700)]
libx264: add preset, tune, profile and fastfirstpass private options

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agolavc: fix misspelling in comment
Dustin Brody [Sat, 6 Aug 2011 00:38:46 +0000 (20:38 -0400)]
lavc: fix misspelling in comment

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoaac: propagate error return values for AV_LOG_ERROR-triggering events
Dustin Brody [Fri, 5 Aug 2011 02:32:09 +0000 (22:32 -0400)]
aac: propagate error return values for AV_LOG_ERROR-triggering events

10 years agolsws: remove optimization debug logs in sws_init_context()
Stefano Sabatini [Thu, 4 Aug 2011 15:53:44 +0000 (17:53 +0200)]
lsws: remove optimization debug logs in sws_init_context()

The logged information is possibly false, and it tends to be outdated
after each change since the logging code needs to be manually updated.

Simplify and prevent confusing wrong debug messages.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agolsws: use array for storing the supported in/out information
Stefano Sabatini [Wed, 3 Aug 2011 23:34:49 +0000 (01:34 +0200)]
lsws: use array for storing the supported in/out information

Also remove the unnecessary isSupportedIn/Out macros.

Make the code more compact/readable, and simplify the access to
lsws-specific pixel format information.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agoapplehttp: fix variant discard logic
Luca Barbato [Wed, 3 Aug 2011 23:06:58 +0000 (01:06 +0200)]
applehttp: fix variant discard logic

The v->ctx is always not NULL now, check for streams presence to
mark the read_header state.

Fixes bug #25, possibly introduced by 603b8bc

10 years agoh263dec: Fix asserts broken by the elimination of FF_COMMON_FRAME.
Alex Converse [Thu, 4 Aug 2011 00:31:11 +0000 (17:31 -0700)]
h263dec: Fix asserts broken by the elimination of FF_COMMON_FRAME.

10 years agocosmetics: remove some stray comments from AVCodec declarations
Diego Biurrun [Wed, 3 Aug 2011 21:28:26 +0000 (23:28 +0200)]
cosmetics: remove some stray comments from AVCodec declarations

10 years agocosmetics: fix indentation/alignment in AVCodec declarations
Diego Biurrun [Wed, 3 Aug 2011 21:27:50 +0000 (23:27 +0200)]
cosmetics: fix indentation/alignment in AVCodec declarations

10 years agoarm: Avoid using the movw instruction needlessly
Måns Rullgård [Mon, 1 Aug 2011 17:21:04 +0000 (20:21 +0300)]
arm: Avoid using the movw instruction needlessly

This fixes building for ARM11 without Thumb2.

Signed-off-by: Martin Storsjö <martin@martin.st>
10 years agoMove an int64_t down in MpegEncContext
Martin Storsjö [Mon, 1 Aug 2011 14:18:13 +0000 (17:18 +0300)]
Move an int64_t down in MpegEncContext

This allows using the same arm assembler offsets for both EABI
and the mach-o ABI.

Signed-off-by: Martin Storsjö <martin@martin.st>
10 years agoRevert "swscale: use 15-bit intermediates for 9/10-bit scaling."
Ronald S. Bultje [Tue, 2 Aug 2011 19:27:43 +0000 (12:27 -0700)]
Revert "swscale: use 15-bit intermediates for 9/10-bit scaling."

This reverts commit ac0fb5934893be554a44d2a1eb7a3bc7bf39da4a. It
causes valgrind errors which I'll want to investigate before
resubmitting this.

10 years agoswscale: use 15-bit intermediates for 9/10-bit scaling.
Ronald S. Bultje [Tue, 2 Aug 2011 04:04:19 +0000 (21:04 -0700)]
swscale: use 15-bit intermediates for 9/10-bit scaling.

10 years agodct32: Add SSE2 ASM optimizations
Vitor Sessak [Sat, 30 Jul 2011 16:39:25 +0000 (18:39 +0200)]
dct32: Add SSE2 ASM optimizations

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agoCorrect chroma vector calculation for RealVideo 3.
Kostya Shishkov [Tue, 2 Aug 2011 11:45:28 +0000 (13:45 +0200)]
Correct chroma vector calculation for RealVideo 3.

Old version divided it wrong, which resulted in chroma drift (visible on FATE
sample too as dirty trails left by clouds).

Signed-off-by: Ronald S. Bultje <rsbultje@gmail.com>
10 years agolavf: Add an option to discard corrupted frames
Zohar Kelrich [Sun, 24 Jul 2011 14:28:33 +0000 (17:28 +0300)]
lavf: Add an option to discard corrupted frames

Signed-off-by: Zohar Kelrich <lumimies@gmail.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>