ffmpeg.git
17 months agolavu/qsv: add log message for libmfx version
Zhong Li [Thu, 28 Dec 2017 09:38:32 +0000 (17:38 +0800)]
lavu/qsv: add log message for libmfx version

It is benefit to diagnose issues related to different libmfx version.

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
17 months agox264: Support version 153
Luca Barbato [Tue, 26 Dec 2017 11:32:42 +0000 (12:32 +0100)]
x264: Support version 153

It has native simultaneus 8 and 10 bit support.

18 months agommaldec: Fix compilation after 2fcb0090
Martin Storsjö [Wed, 20 Dec 2017 07:45:14 +0000 (09:45 +0200)]
mmaldec: Fix compilation after 2fcb0090

Signed-off-by: Martin Storsjö <martin@martin.st>
18 months agoavconv: Use codec hardware config to configure hwaccels
Mark Thompson [Wed, 25 Oct 2017 23:18:47 +0000 (00:18 +0100)]
avconv: Use codec hardware config to configure hwaccels

Removes specific support for all hwaccels supported by the generic code
(CUVID, DXVA2, D3D11VA, VAAPI and VDPAU).

18 months agolavc: Mark all AVHWAccel structures as const
Mark Thompson [Sat, 4 Nov 2017 18:53:26 +0000 (18:53 +0000)]
lavc: Mark all AVHWAccel structures as const

18 months agolavc: Delete all fake hwaccels
Mark Thompson [Wed, 25 Oct 2017 23:18:46 +0000 (00:18 +0100)]
lavc: Delete all fake hwaccels

They are now unused.

18 months agolavc: Remove register mechanism for hwaccels
Mark Thompson [Wed, 25 Oct 2017 23:18:45 +0000 (00:18 +0100)]
lavc: Remove register mechanism for hwaccels

There is no longer any need for a list of them at runtime, because
decoders now carry the pointers to their associated hwaccels internally.
The file containing external declarations is now used to make the list
of hwaccels for configure.

18 months agolavc: Deprecate av_hwaccel_next() and av_register_hwaccel()
Mark Thompson [Wed, 25 Oct 2017 23:18:44 +0000 (00:18 +0100)]
lavc: Deprecate av_hwaccel_next() and av_register_hwaccel()

18 months agolavc: Use hardware config information in ff_get_format()
Mark Thompson [Wed, 25 Oct 2017 23:18:43 +0000 (00:18 +0100)]
lavc: Use hardware config information in ff_get_format()

This removes the dependency that hardware pixel formats previously had on
AVHWAccel instances, meaning only those which actually do something need
exist after this patch.

Also updates avcodec_default_get_format() to be able to choose hardware
formats if either a matching device has been supplied or no additional
external configuration is required, and avcodec_get_hw_frames_parameters()
to use the hardware config rather than searching the old hwaccel list.

18 months agowebp: Fix alpha initialisation
Mark Thompson [Wed, 25 Oct 2017 23:18:42 +0000 (00:18 +0100)]
webp: Fix alpha initialisation

ff_get_format() in the next patch will reject formats which aren't in the
offered list, so the hack in 7cb9296db872c4221453e5411f242ebcfca62664 is
no longer valid.  Change the hack by adding a new field in the VP8 decoder
context to indicate that it's actually WebP and don't call ff_get_format()
at all in that case.

18 months agolavc: Add hardware config metadata for decoders supporting hardware output
Mark Thompson [Wed, 25 Oct 2017 23:18:40 +0000 (00:18 +0100)]
lavc: Add hardware config metadata for decoders supporting hardware output

This includes a pointer to the associated hwaccel for decoders using
hwaccels - these will be used later to implement the hwaccel setup
without needing a global list.

Also added is a new file listing all hwaccels as external declarations -
this will be used later to generate the hwaccel list at configure time.

18 months agolavc: Add codec metadata to indicate hardware support
Mark Thompson [Wed, 25 Oct 2017 23:18:39 +0000 (00:18 +0100)]
lavc: Add codec metadata to indicate hardware support

18 months agoavcodec: add metadata to identify wrappers and hardware decoders
wm4 [Tue, 12 Dec 2017 10:03:43 +0000 (11:03 +0100)]
avcodec: add metadata to identify wrappers and hardware decoders

Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.

Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.

AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.

Based on a patch by Philip Langdale <philipl@overt.org>.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
18 months agoqsv: Support explicit lookahead downscaling
Luca Barbato [Tue, 12 Dec 2017 14:27:52 +0000 (14:27 +0000)]
qsv: Support explicit lookahead downscaling

18 months agoqsv/vp8dec: fixes memory leak issue
Li, Zhong [Thu, 7 Dec 2017 07:26:38 +0000 (15:26 +0800)]
qsv/vp8dec: fixes memory leak issue

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
18 months agolavc/qsvenc: add error messeage if ICQ unsupported.
Li, Zhong [Thu, 7 Dec 2017 06:44:27 +0000 (14:44 +0800)]
lavc/qsvenc: add error messeage if ICQ unsupported.

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
18 months agolavc/qsvenc: ICQ/VCM/QVBR are not avilable on Linux
Li, Zhong [Thu, 7 Dec 2017 06:44:26 +0000 (14:44 +0800)]
lavc/qsvenc: ICQ/VCM/QVBR are not avilable on Linux

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
18 months agolavc/qsvenc: set HRD buffer size
Li, Zhong [Fri, 1 Dec 2017 08:48:45 +0000 (16:48 +0800)]
lavc/qsvenc: set HRD buffer size

Hypothetical Reference Decoding (HRD) model assumes that data flows
into a buffer of the fixed size BufferSizeInKB with a constant bitrate.
Smaller BufferSizeInKB means smaller frame size variations,
but more difficult to maintain HRD.

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
18 months agocheckasm: Use LOCAL_ALIGNED for aligned variables on the stack
Martin Storsjö [Mon, 11 Dec 2017 20:25:16 +0000 (22:25 +0200)]
checkasm: Use LOCAL_ALIGNED for aligned variables on the stack

This fixes fate-checkasm-hevc_mc on ARMCC 5.0 after adding
NEON HEVC MC assembly.

Signed-off-by: Martin Storsjö <martin@martin.st>
18 months agohevc: Add hevc_get_pixel_4/8/12/16/24/32/48/64
Alexandra Hájková [Sun, 3 Dec 2017 08:15:23 +0000 (09:15 +0100)]
hevc: Add hevc_get_pixel_4/8/12/16/24/32/48/64

Checkasm timings:
block size bitdepth  C       NEON
4           8 bit:    146.7   48.7
           10 bit:    146.7   52.7
8           8 bit:    430.3   84.4
           10 bit:    430.4  119.5
12          8 bit:    812.8  141.0
           10 bit:    812.8  195.0
16          8 bit:   1499.1  268.0
           10 bit:   1498.9  368.4
24          8 bit:   4394.2  574.8
           10 bit:   3696.3  804.8
32          8 bit:   5108.6  568.9
           10 bit:   4249.6  918.8
48          8 bit:  16819.6 2304.9
           10 bit:  13882.0 3178.5
64          8 bit:  13490.8 1799.5
           10 bit:  11018.5 2519.4

Signed-off-by: Martin Storsjö <martin@martin.st>
18 months agovaapi_h265: Add named options for setting profile and level
Mark Thompson [Wed, 29 Nov 2017 21:31:53 +0000 (21:31 +0000)]
vaapi_h265: Add named options for setting profile and level

Also fixes the default, which previously contained a nonsense value.

18 months agovaapi_h264: Add named options for setting profile and level
Mark Thompson [Wed, 29 Nov 2017 21:31:11 +0000 (21:31 +0000)]
vaapi_h264: Add named options for setting profile and level

18 months agovaapi: Make the decode profile matching more explicit
Mark Thompson [Thu, 9 Nov 2017 01:04:44 +0000 (01:04 +0000)]
vaapi: Make the decode profile matching more explicit

Also fixes a bug where it could attempt to decode with an unsupported
codec if allow-profile-mismatch was set.

18 months agovaapi_h264: Fix VUI max_dec_frame_buffering
Jun Zhao [Tue, 24 Oct 2017 05:25:21 +0000 (13:25 +0800)]
vaapi_h264: Fix VUI max_dec_frame_buffering

This should refer to the existing SPS structure, not the VAAPI sequence
parameter buffer (which is not yet initialised).

From ffmpeg commit f31478ba1472afe5c1eed60f219ae331816425a2.

Signed-off-by: Mark Thompson <sw@jkqxz.net>
18 months agovaapi_h265: Enable VBR mode
Jun Zhao [Fri, 25 Aug 2017 07:56:51 +0000 (15:56 +0800)]
vaapi_h265: Enable VBR mode

To match vaapi_h264.

From ffmpeg commit 385cafb07ac1e46433931ea9749a134efd7350be.

Signed-off-by: Mark Thompson <sw@jkqxz.net>
18 months agocbs_mpeg2: Fix marker_bit type
Mark Thompson [Thu, 9 Nov 2017 01:04:25 +0000 (01:04 +0000)]
cbs_mpeg2: Fix marker_bit type

18 months agocbs: Add padding to slice data allocations
Mark Thompson [Thu, 9 Nov 2017 01:04:20 +0000 (01:04 +0000)]
cbs: Add padding to slice data allocations

These may be read by the bitstream reader, so they should include the
necessary padding for overreads.

18 months agortsp: only break on parse_rtsp_message on error
Tristan Matthews [Wed, 29 Nov 2017 19:16:02 +0000 (14:16 -0500)]
rtsp: only break on parse_rtsp_message on error

Fix suggested by Luca Barbato.

This was causing spurious EOFs when using -rtsp_transport udp, as
reported in https://bugzilla.libav.org/show_bug.cgi?id=1103

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
18 months agostereo3d: Support view type for frame sequence type
Vittorio Giovara [Mon, 25 Sep 2017 13:09:21 +0000 (15:09 +0200)]
stereo3d: Support view type for frame sequence type

Implement detection in h264 and hevc and insertion in framepack filter.

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
18 months agoprores: Always assume limited range
Vittorio Giovara [Wed, 27 Sep 2017 21:28:55 +0000 (17:28 -0400)]
prores: Always assume limited range

As defined by the specification.

19 months agoqsvenc: cavlc option is only available for h264
Li, Zhong [Mon, 27 Nov 2017 16:19:57 +0000 (11:19 -0500)]
qsvenc: cavlc option is only available for h264

Moving option definition to h264 implementation and fixing command line defaults
in order to properly respect cavlc input value

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
19 months agoqsv/hevcdec: Load hw plugin by default on non-windows os
Li, Zhong [Fri, 10 Nov 2017 08:03:42 +0000 (03:03 -0500)]
qsv/hevcdec: Load hw plugin by default on non-windows os

Software plugin is not available on Linux, Only works on Windows.
Similar changes have been applied to qsv hevc encoder by
b05128f3c953bd66483e697d60a2e7e45ee9cfa0.

Signed-off-by: Zhong Li <zhong.li@intel.com>
Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
19 months agolibavcodec: Don't use dllexport, only dllimport when building DLLs
Martin Storsjö [Thu, 14 Sep 2017 05:33:05 +0000 (08:33 +0300)]
libavcodec: Don't use dllexport, only dllimport when building DLLs

The only purpose of dllexport (which is set while building the library
that exports the symbols) is to have the linker automatically
export such symbols into a DLL without using a def file - it doesn't
affect the generated code.

For both MSVC and mingw builds, this isn't essential since we override
what symbols to export via an autogenerated def file instead.

Update a comment in configure to refer to the right concept.

With lld, this avoids warnings about duplicate export directives,
when some symbols are requested to be exported both via dllexport
attributes and via the autogenerated def file.

This also reduces the number of lines of code marginally.

Signed-off-by: Martin Storsjö <martin@martin.st>
19 months agomakedef: Pass EXTERN_PREFIX from configure to makedef
Martin Storsjö [Thu, 16 Nov 2017 07:32:15 +0000 (09:32 +0200)]
makedef: Pass EXTERN_PREFIX from configure to makedef

This avoids having to use either "dumpbin -headers" to find out
the current architecture, or pass $ARCH from configure to deduce it.

When configuring with --disable-asm, ARCH is equal to "c", which doesn't
give any indication of what symbol prefix is to be used.

Signed-off-by: Martin Storsjö <martin@martin.st>
19 months agoconfigure: Coalesce some arch configuration and PIC handling
Diego Biurrun [Fri, 6 Oct 2017 21:06:45 +0000 (23:06 +0200)]
configure: Coalesce some arch configuration and PIC handling

19 months agoconfigure: Miscellaneous minor changes
Diego Biurrun [Sun, 24 Sep 2017 16:46:47 +0000 (18:46 +0200)]
configure: Miscellaneous minor changes

- Move a variable closer to where it is used
- Add an explanatory comment
- Simplify a crosscompile check
- Minor SHFLAGS simplification
- Coalesce some threads tests

19 months agoMakefile: fix distclean target
James Almer [Mon, 13 Nov 2017 20:34:15 +0000 (17:34 -0300)]
Makefile: fix distclean target

It must imply clean. Regression since 7ebe7e8e7a76c0ce302f4f583ef0d14220031214.

Signed-off-by: James Almer <jamrial@gmail.com>
19 months agoconfigure: fix writing library dependencies to config.sh
James Almer [Mon, 13 Nov 2017 01:56:45 +0000 (22:56 -0300)]
configure: fix writing library dependencies to config.sh

Signed-off-by: James Almer <jamrial@gmail.com>
19 months agovaapi_h264: Add missing return value check
Mark Thompson [Thu, 9 Nov 2017 01:04:39 +0000 (01:04 +0000)]
vaapi_h264: Add missing return value check

19 months agoh264_metadata: Fix clearing SEI payload in error case
Mark Thompson [Thu, 9 Nov 2017 01:04:34 +0000 (01:04 +0000)]
h264_metadata: Fix clearing SEI payload in error case

19 months agocbs_h2645: Fix memory leak on when reading SEI fails
Mark Thompson [Thu, 9 Nov 2017 01:04:30 +0000 (01:04 +0000)]
cbs_h2645: Fix memory leak on when reading SEI fails

19 months agocbs: Add a missing return value check
Mark Thompson [Thu, 9 Nov 2017 01:04:11 +0000 (01:04 +0000)]
cbs: Add a missing return value check

19 months agovaapi_h264: Do not use deprecated header type
Mark Thompson [Sun, 1 Oct 2017 21:55:24 +0000 (22:55 +0100)]
vaapi_h264: Do not use deprecated header type

SEI headers should be inserted as generic raw data (the old specific
type has been deprecated in libva2).

19 months agovaapi_h264: Add workaround for bad SEI in old Intel drivers
Mark Thompson [Tue, 24 Oct 2017 23:15:55 +0000 (00:15 +0100)]
vaapi_h264: Add workaround for bad SEI in old Intel drivers

With pre-2.0 Intel drivers in CBR mode, if an explicit SEI message with
the old (now deprecated) type is not included, the driver generates and
inserts some timing SEI which is almost certainly invlaid.  Before
7a4fac5e91789b73e07bd4ad20493cfde028df76 we always inserted our own SEI
so this would not be visible, but since then it has been possible to
disable that.  We would also like to avoid using the deprecated type,
and using the new type, while working in old drivers, does not suppress
the spurious message like the old type does.

Therefore, suppress the bad SEI insertion by providing a zero-length
buffer with the old type, which the driver can insert harmlessly.

19 months agovp9_superframe_bsf: cache packets by creating new references instead of moving pointers
James Almer [Sun, 5 Nov 2017 16:35:40 +0000 (13:35 -0300)]
vp9_superframe_bsf: cache packets by creating new references instead of moving pointers

Fixes invalid reads after free.

Signed-off-by: James Almer <jamrial@gmail.com>
19 months agosmacker: limit recursion depth of smacker_decode_bigtree
Andreas Cadhalpun [Sat, 19 Nov 2016 13:21:11 +0000 (14:21 +0100)]
smacker: limit recursion depth of smacker_decode_bigtree

This fixes segmentation faults due to stack-overflow caused by too deep
recursion.

Reviewed-by: Michael Niedermayer <michael@niedermayer.cc>
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
Signed-off-by: Sean McGovern <gseanmcg@gmail.com>
19 months agosmacker: add sanity check for length in smacker_decode_tree()
Michael Niedermayer [Thu, 21 Jun 2012 14:01:52 +0000 (16:01 +0200)]
smacker: add sanity check for length in smacker_decode_tree()

Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Bug-Id: 1098
Cc: libav-stable@libav.org
Signed-off-by: Sean McGovern <gseanmcg@gmail.com>
19 months agobuild: Add missing config.sh dependency for pkg-config files
Diego Biurrun [Mon, 6 Nov 2017 16:57:25 +0000 (17:57 +0100)]
build: Add missing config.sh dependency for pkg-config files

Also only update config.sh when it changed to avoid spurious rebuilds.

19 months agobuild: Remove pkg-config files on clean instead of on distclean
Diego Biurrun [Mon, 6 Nov 2017 16:49:55 +0000 (17:49 +0100)]
build: Remove pkg-config files on clean instead of on distclean

The files are no longer generated by configure, so they should not
be removed by the distclean target any longer.

19 months agobuild: Add uninstall-pkgconfig target to match install-lib*-pkgconfig
Diego Biurrun [Mon, 6 Nov 2017 16:44:33 +0000 (17:44 +0100)]
build: Add uninstall-pkgconfig target to match install-lib*-pkgconfig

19 months agomatroskadec: allow RealAudio/Cook/Sipro streams of flavor 0
Sean McGovern [Thu, 2 Nov 2017 00:45:20 +0000 (20:45 -0400)]
matroskadec: allow RealAudio/Cook/Sipro streams of flavor 0

Regression since 569d18aa9dc989c37bb4d4b968026fe5afa6fff9.

Bug-Id: 1055
Cc: libav-stable@libav.org
19 months agoconfigure: Use right variable and right value for AIX ar flags
Diego Biurrun [Sat, 4 Nov 2017 17:50:30 +0000 (18:50 +0100)]
configure: Use right variable and right value for AIX ar flags

19 months agoavconv.c: fix calculation of input file duration in seek_to_start()
Peter Große [Mon, 30 Oct 2017 11:25:26 +0000 (12:25 +0100)]
avconv.c: fix calculation of input file duration in seek_to_start()

Fixes looping files without audio or when using stream_copy, where
ist->nb_samples is not set since no decoding is done.

Signed-off-by: Diego Biurrun <diego@biurrun.de>
19 months agomatroskadec: don't warn about unknown spherical medata when none is present
James Almer [Thu, 2 Nov 2017 23:42:05 +0000 (20:42 -0300)]
matroskadec: don't warn about unknown spherical medata when none is present

track->video.projection.type is set to 0 (a Matroska specific "No spherical
metadata present" value, with no related AVSphericalMapping) by default on
files without the element.

This removes bogus warnings on every single matroska file without Spherical
metadata.

Signed-off-by: James Almer <jamrial@gmail.com>
19 months agolibspeexenc: Use speex_lib_get_mode instead of the speex_foo_mode data symbols
Martin Storsjö [Fri, 3 Nov 2017 09:36:49 +0000 (11:36 +0200)]
libspeexenc: Use speex_lib_get_mode instead of the speex_foo_mode data symbols

This avoids issues linking to a DLL version of libspeex, since the
libspeex headers lack proper dllimport declarations for the data
symbols.

This isn't an issue when building with mingw with GNU binutils, since
GNU ld can fix up that kind of data import automatically.

libspeexdec.c already uses speex_lib_get_mode as well.

Signed-off-by: Martin Storsjö <martin@martin.st>
19 months agoRevert "configure: Detect AIX ar command instead of hardcoding it in the OS section"
Diego Biurrun [Fri, 6 Oct 2017 19:38:43 +0000 (21:38 +0200)]
Revert "configure: Detect AIX ar command instead of hardcoding it in the OS section"

This reverts commit 4822ee3ca620a92cd2b0a9a03ea9e34288192c79.
AIX is a fringe oddity. Do not clutter the main codepath with AIX workarounds.

19 months agoconfigure: Simplify MIPS instruction set handling
Diego Biurrun [Fri, 20 Oct 2017 01:57:55 +0000 (03:57 +0200)]
configure: Simplify MIPS instruction set handling

19 months agoconfigure: Miscellaneous minor changes to config file handling
Diego Biurrun [Sat, 23 Sep 2017 14:42:11 +0000 (16:42 +0200)]
configure: Miscellaneous minor changes to config file handling

- Move generating config.fate to a more sensible place.
- Move printing warnings to a more appropriate place.
- Improve "generated by" comment in libavutil/avconfig.h.
- Drop pointless informative output about generating config files.
- Write a standard comment header to config.asm as well.

19 months agoconfigure: Remove unused apply() helper function
Diego Biurrun [Fri, 20 Oct 2017 22:22:38 +0000 (00:22 +0200)]
configure: Remove unused apply() helper function

19 months agoconfigure: Miscellaneous small changes to helper functions
Diego Biurrun [Fri, 20 Oct 2017 18:58:12 +0000 (20:58 +0200)]
configure: Miscellaneous small changes to helper functions

- Reuse sanitize_var_name() where appropriate
- Add some quotes to enabled()/disabled() to ease readability
- Fix logged names of some helper functions
- Filter LDFLAGS also in test_ldflags()

19 months agoconfigure: Stop using dlltool to create an import library
Martin Storsjö [Mon, 30 Oct 2017 09:39:53 +0000 (11:39 +0200)]
configure: Stop using dlltool to create an import library

There shouldn't be any functional difference between the import
library created by dlltool and the one produced by the linker itself.
Keep installing it with both names though, for compatibility with users
that expect both to exist.

The dlltool step was added in ec10a9ab4; prior to that, a MSVC
compatible import library was generated using lib.exe. After that
commit, there was no functional difference between the two import
libraries (and since MSVC 2012, link.exe works just fine with the
GNU binutils generated one).

Signed-off-by: Martin Storsjö <martin@martin.st>
19 months agodashenc: copy stream frame rate to output stream
Peter Große [Thu, 26 Oct 2017 16:02:05 +0000 (18:02 +0200)]
dashenc: copy stream frame rate to output stream

Leads to setting of DefaultDuration in Matroska muxer based on frame rate instead of timebase.
Fixes playback in Chrome.

Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
19 months agodashenc: fix bitrate estimation with correct scaling
Anton Schubert [Thu, 26 Oct 2017 16:02:04 +0000 (18:02 +0200)]
dashenc: fix bitrate estimation with correct scaling

Signed-off-by: Anton Schubert <ischluff@mailbox.org>
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
19 months agodoc: Provide better examples for hls and segment muxing
Luca Barbato [Fri, 13 Oct 2017 10:24:51 +0000 (12:24 +0200)]
doc: Provide better examples for hls and segment muxing

Some encoders do not output further IDRs if not requested to.

19 months agoconfigure: Drop support for legacy PGI compiler
Diego Biurrun [Fri, 6 Oct 2017 00:24:25 +0000 (02:24 +0200)]
configure: Drop support for legacy PGI compiler

19 months agobuild: Drop support for legacy TI ARM compiler
Diego Biurrun [Sun, 24 Sep 2017 12:24:02 +0000 (14:24 +0200)]
build: Drop support for legacy TI ARM compiler

20 months agohwcontext_vaapi: Set message callbacks on internally-created devices
Mark Thompson [Sun, 1 Oct 2017 21:51:31 +0000 (22:51 +0100)]
hwcontext_vaapi: Set message callbacks on internally-created devices

The message callbacks are library-safe in libva2, so we can now use
them.

20 months agovaapi: Always free parameter buffers after vaEndPicture() with libva2
Mark Thompson [Sun, 1 Oct 2017 21:51:20 +0000 (22:51 +0100)]
vaapi: Always free parameter buffers after vaEndPicture() with libva2

This is an ABI change in libva2: previously the Intel driver had this
behaviour and it was implemented as a driver quirk, but now it is part
of the specification so all drivers must do it.

20 months agovaapi: Remove H.264 baseline profile
Mark Thompson [Sun, 1 Oct 2017 21:51:13 +0000 (22:51 +0100)]
vaapi: Remove H.264 baseline profile

This has been deprecated in libva2 because hardware does not and will not
support it.  Therefore never consider it for decode, and for encode assume
the user meant constrained baseline profile instead.

20 months agoconfigure: Add config option for libva2 (VAAPI 1)
Mark Thompson [Sun, 1 Oct 2017 21:51:07 +0000 (22:51 +0100)]
configure: Add config option for libva2 (VAAPI 1)

20 months agovaapi: Disable deprecation warnings around use of struct vaapi_context
Mark Thompson [Sun, 1 Oct 2017 21:50:59 +0000 (22:50 +0100)]
vaapi: Disable deprecation warnings around use of struct vaapi_context

20 months agoarm: Remove a redundant check in fmtconvert_init_arm.c
Martin Storsjö [Mon, 23 Oct 2017 07:44:53 +0000 (10:44 +0300)]
arm: Remove a redundant check in fmtconvert_init_arm.c

This was missed in e2710e790c0, where have_vfp && !have_vfpv3 were
converted into have_vfp_vm.

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agoarm: Check for have_vfp_vm instead of !have_vfpv3 for float_dsp_vfp
Martin Storsjö [Mon, 23 Oct 2017 07:44:07 +0000 (10:44 +0300)]
arm: Check for have_vfp_vm instead of !have_vfpv3 for float_dsp_vfp

This was missed in e2710e790c0 since those functions weren't exercised
by checkasm.

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agolavc: fix hw_device_ctx operation
wm4 [Mon, 23 Oct 2017 22:28:03 +0000 (00:28 +0200)]
lavc: fix hw_device_ctx operation

Commit b46a77f19d accidentally broke this (requested change that was
added to the patch later and which was not fully tested).

Signed-off-by: Mark Thompson <sw@jkqxz.net>
20 months agoconfigure: Group system feature variables and system libraries together
Diego Biurrun [Tue, 26 Sep 2017 16:26:11 +0000 (18:26 +0200)]
configure: Group system feature variables and system libraries together

20 months agobuild: Delete compiler-generated compat files on 'make clean'
Diego Biurrun [Thu, 19 Oct 2017 17:18:18 +0000 (19:18 +0200)]
build: Delete compiler-generated compat files on 'make clean'

20 months agoconfigure: Bail out early if neither static nor shared libs are built
Diego Biurrun [Sun, 24 Sep 2017 09:52:08 +0000 (11:52 +0200)]
configure: Bail out early if neither static nor shared libs are built

20 months agoconfigure: Move enabling libc_type into probe_libc() function
Diego Biurrun [Sat, 23 Sep 2017 14:35:49 +0000 (16:35 +0200)]
configure: Move enabling libc_type into probe_libc() function

20 months agolavc: external hardware frame pool initialization
wm4 [Thu, 19 Oct 2017 14:38:20 +0000 (16:38 +0200)]
lavc: external hardware frame pool initialization

This adds a new API, which allows the API user to query the required
AVHWFramesContext parameters. This also reduces code duplication across
the hwaccels by introducing ff_decode_get_hw_frames_ctx(), which uses
the new API function. It takes care of initializing the hw_frames_ctx
if needed, and does additional error handling and API usage checking.

Support for VDA and Cuvid missing.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
20 months agoFATE: add a test for the H.264 sample fixed by 7c4f6f6
Anton Khirnov [Thu, 17 Aug 2017 10:25:56 +0000 (12:25 +0200)]
FATE: add a test for the H.264 sample fixed by 7c4f6f6

20 months agoqsv: Make the hevc idr_interval consistent with the h264 one
Luca Barbato [Tue, 17 Oct 2017 11:04:57 +0000 (11:04 +0000)]
qsv: Make the hevc idr_interval consistent with the h264 one

According to the MediaSDK documentation the idr_interval value has
a different meaning depending on the codec:

    0 in H264 means make every I-frame IDR, in HEVC it means to have
    it only at the beginning.

    1 in H264 means every other I-frame is not-IDR, in HEVC it means
    that every I-frame is IDR.

Keep the behaviour consistent between the two encoders by increasing
by 1 internally the idr_interval value for HEVC.

20 months agoconfigure: Set the default assembler to armasm64 for MSVC for arm64
Martin Storsjö [Fri, 13 Oct 2017 08:10:27 +0000 (11:10 +0300)]
configure: Set the default assembler to armasm64 for MSVC for arm64

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agoaarch64: Remove a dot from a label
Martin Storsjö [Fri, 13 Oct 2017 09:22:55 +0000 (12:22 +0300)]
aarch64: Remove a dot from a label

This fixes building with armasm64 (when run through gas-preprocessor).

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agoaarch64: Get rid of a stray double space
Martin Storsjö [Fri, 13 Oct 2017 08:10:42 +0000 (11:10 +0300)]
aarch64: Get rid of a stray double space

The extra space got included as part of the expansion of ELF, which
later interfered with gas-preprocessor which earlier only stripped out
leftover lines starting with '#' if the line started with that char.

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agocbs: Add test dependencies
Mark Thompson [Mon, 16 Oct 2017 22:02:24 +0000 (23:02 +0100)]
cbs: Add test dependencies

Fixes the MPEG-2 failure with --disable-error-resilience.

20 months agomss1: Add missing macro parameters to ARITH_GET_* macros
Diego Biurrun [Wed, 11 Oct 2017 03:57:59 +0000 (05:57 +0200)]
mss1: Add missing macro parameters to ARITH_GET_* macros

It is wrong to pass no arguments to a macro that expects one argument
and some compilers complain.

20 months agoqsv: Expose idr_interval for hevc as well
Luca Barbato [Fri, 13 Oct 2017 23:22:13 +0000 (23:22 +0000)]
qsv: Expose idr_interval for hevc as well

20 months agoRemove dv1394 input device
Josh de Kock [Tue, 26 Sep 2017 14:49:18 +0000 (15:49 +0100)]
Remove dv1394 input device

Support for this device has been removed in the Linux kernel since v2.6.37.
dv1394 has been superseded by libiec61883 which is functionally equivalent.

Signed-off-by: Josh de Kock <josh@itanimul.li>
Signed-off-by: Diego Biurrun <diego@biurrun.de>
20 months agoavfoundation: Drop silly _dec suffix from filename
Diego Biurrun [Wed, 27 Sep 2017 13:28:33 +0000 (15:28 +0200)]
avfoundation: Drop silly _dec suffix from filename

20 months agoalsa: Coalesce source files after outdev removal
Diego Biurrun [Wed, 27 Sep 2017 13:24:58 +0000 (15:24 +0200)]
alsa: Coalesce source files after outdev removal

20 months agooss: Coalesce source files after outdev removal
Diego Biurrun [Wed, 27 Sep 2017 13:18:58 +0000 (15:18 +0200)]
oss: Coalesce source files after outdev removal

20 months agosndio: Coalesce source files after outdev removal
Diego Biurrun [Wed, 27 Sep 2017 13:12:41 +0000 (15:12 +0200)]
sndio: Coalesce source files after outdev removal

20 months agoRemove all output devices
Diego Biurrun [Sat, 23 Sep 2017 14:26:28 +0000 (16:26 +0200)]
Remove all output devices

The libavformat API is not suitable for exporting output devices as muxers.
Some practical problems are e.g. lack of timing/synchronization mechanisms
or interaction with output-specific features.

20 months agopictor: Correctly check frame dimensions
Michael Niedermayer [Tue, 7 Feb 2017 14:49:09 +0000 (15:49 +0100)]
pictor: Correctly check frame dimensions

Fixes: 559/clusterfuzz-testcase-6424225917173760
Bug-Id: CVE-2017-7862
CC: libav-stable@libav.org
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/targets/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
(cherry picked from commit 8c2ea3030af7b40a3c4275696fb5c76cdb80950a)
Signed-off-by: Diego Biurrun <diego@biurrun.de>
20 months agomakedef: Add support for identifying the ARM64 machine type
Martin Storsjö [Wed, 13 Sep 2017 20:05:50 +0000 (23:05 +0300)]
makedef: Add support for identifying the ARM64 machine type

Since this machine type is 5 chars while the existing ones only
were 3 (which the regexp assumed), the regexp has to be extended
a little.

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agoconfigure: Add a comment about why we don't try to enable pic on arm on target_os...
Martin Storsjö [Thu, 12 Oct 2017 08:08:32 +0000 (11:08 +0300)]
configure: Add a comment about why we don't try to enable pic on arm on target_os=win32

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agoconfigure: Don't add -fPIC to asflags when targeting windows
Martin Storsjö [Thu, 12 Oct 2017 08:04:53 +0000 (11:04 +0300)]
configure: Don't add -fPIC to asflags when targeting windows

On X86 windows, asflags weren't actually ever used for anything,
since assembling used x86asflags instead, and that flags list
had -DPIC already.

This fixes building shared libraries with clang for arm/aarch64
windows. (This wasn't an issue when in msvc mode before, since
we don't try to enable pic at all there, since the msvc armasm
assembler fails on our pic constructs there.)

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agoconfigure: Don't add -fPIC to cflags for target_os=win32
Martin Storsjö [Thu, 12 Oct 2017 08:03:08 +0000 (11:03 +0300)]
configure: Don't add -fPIC to cflags for target_os=win32

We skipped adding it to cflags for mingw/cygwin configurations
where the compiler either complains loudly or even errors out;
do the same for target_os=win32, for the case when building with
clang in msvc mode.

This wasn't needed for the actual msvc before, since msvc uses
msvc_common_flags to filter out this flag from cflags.
When building with clang in msvc mode, no such filter is used.

This fixes building shared libraries with clang in msvc mode.

Signed-off-by: Martin Storsjö <martin@martin.st>
20 months agobuild: CryptGenRandom --> wincrypt, it is a better name
Diego Biurrun [Tue, 26 Sep 2017 16:24:24 +0000 (18:24 +0200)]
build: CryptGenRandom --> wincrypt, it is a better name

20 months agobuild: Rename stdatomic_h variable to stdatomic
Diego Biurrun [Sun, 24 Sep 2017 18:10:02 +0000 (20:10 +0200)]
build: Rename stdatomic_h variable to stdatomic

It does not represent a header but a complete system capability.