Anton Khirnov [Fri, 20 May 2016 08:20:33 +0000 (10:20 +0200)]
h264: do not pass H264Context to h264_slice_header_parse()
This should make it more clear that this function does not need any
decoder-global state other than the parameter sets.
Anton Khirnov [Thu, 19 May 2016 06:19:14 +0000 (08:19 +0200)]
h264: fix warnings in fill_filter_caches_inter()
The code does some weird casting to a 2-dimensional sub-array of
ref2frm. This is not necessary, since only one dimension is needed
there.
Anton Khirnov [Wed, 18 May 2016 12:33:33 +0000 (14:33 +0200)]
h264: drop tests whether the codec id is AV_CODEC_ID_H264
Those are unused remnants of the old SVQ3 code.
Anton Khirnov [Wed, 18 May 2016 12:31:48 +0000 (14:31 +0200)]
h264_cabac: drop an always true condition
Anton Khirnov [Wed, 18 May 2016 08:36:33 +0000 (10:36 +0200)]
h264: add H264_ prefix to the NAL unit types
This will prevent conflicts e.g. in code that deals with both h264 and
hevc.
Anton Khirnov [Wed, 18 May 2016 08:23:21 +0000 (10:23 +0200)]
h264_sei: drop an unnecessary h264dec.h include
The code does not depend on the h264 decoder anymore and only needs
information from h264_ps
Anton Khirnov [Wed, 18 May 2016 08:22:24 +0000 (10:22 +0200)]
lavc: drop unnecessary h264dec.h includes
Anton Khirnov [Wed, 18 May 2016 08:04:44 +0000 (10:04 +0200)]
h264: tighten the valid range for ref_frame_count
This field (which the spec calls max_num_ref_frames) must be less than
or equal to MaxDpbFrames, which is at most 16.
Anton Khirnov [Wed, 18 May 2016 07:40:33 +0000 (09:40 +0200)]
h264: move the parameter set definitions to a new header file
The PS parsing code is independent from the decoder, so it makes more
sense for it to have its own separate header.
Anton Khirnov [Wed, 18 May 2016 07:34:05 +0000 (09:34 +0200)]
svq3: stop using H264Picture
The SVQ3 decoder has been decoupled from the H.264 decoder, so it can
now use its own data type.
Anton Khirnov [Wed, 18 May 2016 07:16:35 +0000 (09:16 +0200)]
h264: create a new header for common h264 definitions
Move the NAL unit types into it. This will allow to stop including the
whole decoder-specific h264dec.h in some code that is unrelated to the
decoder and only needs some enum values.
Anton Khirnov [Wed, 18 May 2016 07:02:39 +0000 (09:02 +0200)]
h264: rename h264.[ch] to h264dec.[ch]
This is more consistent with the naming of other decoders.
Anton Khirnov [Wed, 18 May 2016 05:27:32 +0000 (07:27 +0200)]
h264: factor out setting frame properties / side data
Right now this code is mixed with selecting the next output frame. Move
it to a separate function called from h264_field_start(), which is a
more appropriate place for this.
Anton Khirnov [Tue, 17 May 2016 18:01:34 +0000 (20:01 +0200)]
h264: drop unused NAL_FF_IGNORE
Anton Khirnov [Tue, 17 May 2016 17:00:18 +0000 (19:00 +0200)]
h264: move a per-field block from decode_slice_header() to field_start()
This is a more appropriate place for it.
Anton Khirnov [Tue, 17 May 2016 16:57:23 +0000 (18:57 +0200)]
h264: only allow ending a field/starting a new one before finish_setup()
Doing this after ff_thread_finish_setup() is called is invalid and can
conflict with reads from the other thread.
Anton Khirnov [Tue, 17 May 2016 14:45:15 +0000 (16:45 +0200)]
h264: store {curr,max}_pic_num in the per-slice context
While the value of those variables will be constant for the whole frame,
they are only used in two functions called from slice header decoding.
Moving them to the per-slice context allows us to make the H264Context
passed to slice_header_parse() constant.
Anton Khirnov [Tue, 17 May 2016 13:35:50 +0000 (15:35 +0200)]
h264: decode the poc values from the slice header into the per-slice context
Copy them into the decoder-global context in field_start(). This avoids
modifying the decoder-global context during bitstream parsing.
Anton Khirnov [Tue, 17 May 2016 13:07:23 +0000 (15:07 +0200)]
h264: set mb_aff_frame in frame_start()
Avoid unnecessary modification of the decoder-global state in per-slice
code.
Anton Khirnov [Tue, 17 May 2016 12:51:01 +0000 (14:51 +0200)]
h264: move the block starting a new field out of slice_header_parse()
There is no bitstream parsing in that block and messing with
decoder-global state is not something that belongs into header parsing.
Nothing else in this function depends on the value of current_slice,
except for two validity checks. Those checks are also moved out of
slice_header_parse().
Anton Khirnov [Mon, 16 May 2016 07:34:44 +0000 (09:34 +0200)]
h264: pass a H2645NAL to slice header decoding
Replace the decoder-global nal_unit_type/nal_ref_idc variables with the
per-NAL ones. The decoder-global ones still cannot be removed because
they are used by hwaccels.
Vittorio Giovara [Fri, 3 Jun 2016 15:53:25 +0000 (11:53 -0400)]
fate: Add TrueMotion 2 RT tests
Vittorio Giovara [Fri, 3 Jun 2016 19:51:30 +0000 (15:51 -0400)]
fate: Move Duck Truemotion 1 and 2 tests to vpx.mak
Paul B Mahol [Fri, 17 Jun 2016 16:30:34 +0000 (12:30 -0400)]
Add TrueMotion 2.0 Real Time decoder
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Vittorio Giovara [Fri, 3 Jun 2016 19:51:32 +0000 (15:51 -0400)]
fate: Add tests for MagicYUV
Paul B Mahol [Sat, 18 Jun 2016 22:23:28 +0000 (18:23 -0400)]
Add MagicYUV decoder
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Jerome Martinez [Thu, 16 Jun 2016 14:33:55 +0000 (16:33 +0200)]
ffv1: Error out on unsupported format
Transparency is supported only by YUV and within specific bit depths.
Martin Storsjö [Sat, 11 Jun 2016 11:17:37 +0000 (14:17 +0300)]
checkasm: Add tests for h264 idct
The tests are inspired by similar tests for vp9 by
Ronald Bultje.
Signed-off-by: Martin Storsjö <martin@martin.st>
Vittorio Giovara [Thu, 9 Jun 2016 22:55:19 +0000 (18:55 -0400)]
mov: Support prores with multiple stsd
This function needs to return false, or data in the additional tables
will be skipped, and the decoder will not be able to decode frames
associated with them.
Vittorio Giovara [Wed, 15 Jun 2016 19:24:30 +0000 (15:24 -0400)]
mov: Implement support for multiple sample description tables
Store data from each stsd in a separate extradata buffer, keep track of
the stsc index for read and seek operations, switch buffers when the
index differs. Decoder is notified with an AV_PKT_DATA_NEW_EXTRADATA
packet side data.
Since H264 supports this notification, and can be reset midstream, enable
this feature only for multiple avcC's. All other stsd types (such as
hvc1 and hev1) need decoder-side changes, so they are left disabled for
now.
This is implemented only in non-fragmented MOVs.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Vittorio Giovara [Thu, 9 Jun 2016 22:55:17 +0000 (18:55 -0400)]
h264: Support AV_PKT_DATA_NEW_EXTRADATA
Vittorio Giovara [Thu, 9 Jun 2016 22:55:16 +0000 (18:55 -0400)]
lavc: Document AV_PKT_DATA_NEW_EXTRADATA
Martin Storsjö [Sat, 11 Jun 2016 19:06:16 +0000 (22:06 +0300)]
x86: Add missing movsxd for the int stride parameter
Signed-off-by: Martin Storsjö <martin@martin.st>
Diego Biurrun [Mon, 13 Jun 2016 12:50:38 +0000 (12:50 +0000)]
avdevice: Ignore timefilter test program
Diego Biurrun [Mon, 13 Jun 2016 16:11:49 +0000 (18:11 +0200)]
LICENSE: Fix silly typo
Diego Biurrun [Mon, 13 Jun 2016 16:14:41 +0000 (18:14 +0200)]
h264: Drop unused function check_opcodes()
Vittorio Giovara [Thu, 9 Jun 2016 22:35:03 +0000 (18:35 -0400)]
avpacket: Error out when creating 0-sized side data
This mimics the behaviour of other av_*_new_side_data().
This is not caught by the malloc check, since padding
is always added to the allocated size.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Vittorio Giovara [Wed, 1 Jun 2016 20:13:17 +0000 (16:13 -0400)]
pixdesc: Use C99 array to list color properties names
Anton Mitrofanov [Sun, 8 May 2016 11:28:00 +0000 (13:28 +0200)]
h264: Fix decoding delay for Intra only streams
Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Sat, 14 May 2016 15:15:46 +0000 (17:15 +0200)]
lavc: add H.264 MVC profiles
Anton Khirnov [Thu, 12 May 2016 12:37:35 +0000 (14:37 +0200)]
h264: factor out setting the parameter sets for a frame
Anton Khirnov [Thu, 12 May 2016 12:25:52 +0000 (14:25 +0200)]
h264: pass just the PPS to get_chroma_qp()
It does not need the whole context. This will simplify the following
commit.
Anton Khirnov [Tue, 10 May 2016 11:34:59 +0000 (13:34 +0200)]
h264: merge the two reinit blocks in slice_header_parse()
The only difference is that the first of them contains a
ff_h264_flush_change() call. While that is not necessary in the second
block, it should cause no problems either.
Reduce the verbosity of the reinit log message from info to verbose,
since now it will be displayed during every decode session.
Anton Khirnov [Mon, 9 May 2016 13:58:32 +0000 (15:58 +0200)]
h264: factor starting a new field out of parsing the slice header
Anton Khirnov [Mon, 9 May 2016 12:25:56 +0000 (14:25 +0200)]
h264: postpone generating the implicit MMCOs
Do it right before the MMCOs are applied to the DPB. This will allow
moving the frame_start() call out of the slice header parsing, since
generating the implicit MMCOs needs to be done after frame_start().
Anton Khirnov [Mon, 9 May 2016 11:48:01 +0000 (13:48 +0200)]
h264: decode the MMCOs into per-slice contexts
They are stored in the slice header, so technically they are per-slice
(though they must be the same in every slice). This will simplify the
following commits.
Anton Khirnov [Mon, 9 May 2016 07:30:10 +0000 (09:30 +0200)]
h264: rename mmco_index to nb_mmco
The variable stores the number of mmco entries, so the current name is
misleading.
Anton Khirnov [Sat, 16 Apr 2016 01:20:37 +0000 (03:20 +0200)]
h264: move initializing the slice start out of h264_slice_header_parse()
Anton Khirnov [Thu, 14 Apr 2016 18:53:59 +0000 (20:53 +0200)]
h264: move calculating the POC out of h264_slice_header_parse()
This function does not do any bitstream parsing and it depends on the
current frame being allocated, so this will allow the frame_start() to
be moved out eventually.
Anton Khirnov [Thu, 14 Apr 2016 18:53:59 +0000 (20:53 +0200)]
h264: move building the reference list out of h264_slice_header_parse()
This does not do any bitstream parsing and will allow moving out other
code in later commits.
Anton Khirnov [Thu, 14 Apr 2016 18:53:59 +0000 (20:53 +0200)]
h264: move initing the implicit pred weight table out of h264_slice_header_parse()
It depends on the reference list, so this will allow moving out the
reference list construction and consequently other code it depends on.
Anton Khirnov [Fri, 15 Apr 2016 14:10:21 +0000 (16:10 +0200)]
h264: split reading the ref list modifications and actually building the ref list
This will allow postponing the reference list construction (and by
consequence some other functions, like frame_start) until the whole
slice header has been parsed.
Anton Khirnov [Fri, 15 Apr 2016 13:02:33 +0000 (15:02 +0200)]
h264: move initialising the implicit pred weight table for MBAFF
Do it where the normal implicit table is initialised.
Anton Khirnov [Fri, 15 Apr 2016 13:00:29 +0000 (15:00 +0200)]
h264: call ff_h264_fill_mbaff_ref_list() when constructing the normal ref list
There is no real reason to call it separately.
Anton Khirnov [Fri, 15 Apr 2016 12:45:48 +0000 (14:45 +0200)]
h264: move initialising the explicit pred weight table for MBAFF
Currently it's done in the code that initialises the ref list for
MBAFF, which is not a logical place for it. Move it to the function that
parses the pred table from the bitstream, which is analogous to what is
done for the implicit weight table as well.
Anton Khirnov [Thu, 14 Apr 2016 18:59:20 +0000 (20:59 +0200)]
h264: drop an outdated comment
Anton Khirnov [Thu, 14 Apr 2016 18:53:59 +0000 (20:53 +0200)]
h264: move direct mode inits out of h264_slice_header_parse()
This code does not do any bitstream parsing, it just initializes some
internal state.
Anton Khirnov [Wed, 13 Apr 2016 15:53:50 +0000 (17:53 +0200)]
h264: start splitting decode_slice_header()
That function is currently very long and entangles bitstream parsing and
decoder configuration. This makes the code much harder to read than
necessary.
Begin splitting the code that configures the decoder state based on the
slice header information from the parsing of the slice header.
Mark Thompson [Tue, 31 May 2016 09:21:19 +0000 (10:21 +0100)]
vaapi_h265: cu_qp_delta should not be used in constant-QP mode
Mark Thompson [Wed, 18 May 2016 09:19:07 +0000 (10:19 +0100)]
vaapi_h264: Add source version identifier as unregistered SEI
Contains the libavcodec version, the VAAPI version and the libva
driver vendor string.
Mark Thompson [Tue, 17 May 2016 14:52:58 +0000 (15:52 +0100)]
vaapi_h264: Add support for SEI messages
Send buffering_period and pic_timing messages when in modes
targetting bitrate. Also adds NAL HRD parameters to VUI.
Mark Thompson [Sat, 9 Apr 2016 15:48:27 +0000 (16:48 +0100)]
vaapi_encode: Add support for writing arbitrary additional packed headers
Mark Thompson [Tue, 17 May 2016 14:14:57 +0000 (15:14 +0100)]
vaapi_h264: Add support for VUI parameters
Supports aspect ratio, colour format and timing information.
Anton Khirnov [Thu, 9 Jun 2016 08:29:55 +0000 (10:29 +0200)]
h264: drop unused H264Context.gb
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Diego Biurrun [Tue, 7 Jun 2016 16:02:34 +0000 (18:02 +0200)]
Drop unnecessary golomb.h #includes
Diego Biurrun [Tue, 7 Jun 2016 15:18:14 +0000 (17:18 +0200)]
Drop unnecessary unary.h #includes
Diego Biurrun [Tue, 7 Jun 2016 14:35:18 +0000 (16:35 +0200)]
dvbsub_parser: Add missing mem.h #include
Diego Biurrun [Sat, 4 Jun 2016 14:53:54 +0000 (16:53 +0200)]
gsm: Move requant_tab table to the gsm tables file
This avoids duplicating the table in the gsm template file.
Also adjust the table type to uint8_t to save space.
Diego Biurrun [Sat, 4 Jun 2016 15:13:39 +0000 (17:13 +0200)]
mpc: Drop unused GetBitContext context member
Diego Biurrun [Sat, 4 Jun 2016 15:12:41 +0000 (17:12 +0200)]
svq1enc: Drop unused GetBitContext context member
Diego Biurrun [Sat, 4 Jun 2016 06:41:15 +0000 (08:41 +0200)]
vorbis: Kill some pointless debug code
Diego Biurrun [Sat, 4 Jun 2016 10:58:11 +0000 (12:58 +0200)]
mss2: Drop a silly assert
Diego Biurrun [Sat, 4 Jun 2016 13:07:30 +0000 (15:07 +0200)]
get_bits: Move BITSTREAM_READER_LE definition before all relevant #includes
This avoids the danger that get_bits.h might get indirectly #included before
BITSTREAM_READER_LE is defined.
Also sort headers into canonical order where appropriate.
Diego Biurrun [Sat, 4 Jun 2016 15:04:45 +0000 (17:04 +0200)]
indeo2: Drop disabled big-endian ir2_codes table
Only the little-endian variant of the table is ever used.
Diego Biurrun [Sat, 4 Jun 2016 09:45:16 +0000 (11:45 +0200)]
Remove unnecessary get_bits.h #includes
Paul B Mahol [Wed, 1 Jun 2016 19:10:42 +0000 (15:10 -0400)]
sgirledec: simplify, no need to use reget buffer
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Paul B Mahol [Wed, 1 Jun 2016 19:46:49 +0000 (15:46 -0400)]
aic: add frame threading support
Signed-off-by: Paul B Mahol <onemda@gmail.com>
Vittorio Giovara [Fri, 3 Jun 2016 18:09:18 +0000 (14:09 -0400)]
fate: Move Canopus decoder tests to a separate file
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Vittorio Giovara [Fri, 3 Jun 2016 16:14:50 +0000 (12:14 -0400)]
avconv: Do not copy extradata if source buffer is empty
Fixes clang-usan runtime error "null pointer passed as argument 2,
which is declared to never be null" while streamcopying.
Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
Denis Charmet [Sat, 4 Jun 2016 11:22:42 +0000 (13:22 +0200)]
vp9: Return the correct size when decoding a superframe
According to avcodec.h, avcodec_decode_video2 should return the number of
bytes used if a frame was decoded.
The current implementation returns size - used size of all the subframes.
This fixes the VLC's bug https://trac.videolan.org/vlc/ticket/16836.
The superframe is always fully consumed.
Signed-off-by: Diego Biurrun <diego@biurrun.de>
Diego Biurrun [Fri, 27 May 2016 18:14:21 +0000 (20:14 +0200)]
build: Only enable symbol reduction if the compiler does proper DCE
With compilers that do not support proper dead code elimination, like
Sun C 5.12, linking fails due to missing references to unavailable,
but also unused, symbols.
Bug-Id: 895
Diego Biurrun [Fri, 27 May 2016 09:38:38 +0000 (11:38 +0200)]
build: Simplify postprocessing of linker version script files
Generate the files in a single postprocessing step w/o intermediate files.
Diego Biurrun [Tue, 24 May 2016 00:18:40 +0000 (02:18 +0200)]
build: Change structure of the linker version script templates
Split version files into one line per symbol/directive to allow compatibility
with the Solaris linker without preprocessing and eliminate $ from version file
templates to simplify the postprocessing shell command.
Diego Biurrun [Tue, 24 May 2016 10:39:54 +0000 (12:39 +0200)]
build: Print a message when generating version scripts
Diego Biurrun [Wed, 25 May 2016 11:34:12 +0000 (13:34 +0200)]
asm: FF_-prefix internal macros used in inline assembly
These warnings conflict with system macros on Solaris, producing
truckloads of warnings about macro redefinition.
Diego Biurrun [Tue, 24 May 2016 18:06:03 +0000 (20:06 +0200)]
Drop unnecessary libavutil/x86/asm.h #includes
Luca Barbato [Thu, 26 May 2016 00:41:25 +0000 (02:41 +0200)]
ac3: Check the array bound before dereferencing
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Mark Thompson [Tue, 17 May 2016 22:08:57 +0000 (23:08 +0100)]
vaapi_h264: Add trivial support for low-power encoding
Experimental; requires Skylake and VAAPI 0.39.1 (not yet released).
Also increases the allowed range of the quality option - in low-power
mode, the Intel driver supports levels 1-8 (and 0 meaning default).
Mark Thompson [Mon, 16 May 2016 13:01:31 +0000 (14:01 +0100)]
vaapi_h264: Fix frame_num after non-reference frames
Non-reference frames (nal_ref_idc == 0) should be discardable, so
frame_num does not advance after them. Before this change, a stream
containing unreferenced B-frames would be rejected by the reference
decoder.
Mark Thompson [Wed, 18 May 2016 09:58:56 +0000 (10:58 +0100)]
vaapi_encode: Check config attributes before creating config
This prevents attempts to use unsupported modes, such as low-power
H.264 mode on non-Skylake targets. Also fixes a crash on invalid
configuration, when trying to destroy an invalid VA config/context.
Diego Biurrun [Tue, 24 May 2016 10:16:52 +0000 (12:16 +0200)]
build: Ignore generated mapfile and remove it on distclean
Anton Khirnov [Tue, 24 May 2016 20:20:45 +0000 (22:20 +0200)]
FATE: drop the audio stream from the dxtory test
This is a video test and there are no audio packets in the sample
anyway.
Anton Khirnov [Tue, 24 May 2016 14:49:19 +0000 (16:49 +0200)]
avconv: fix parsing bitstream filters
The current code modifies the user-supplied string, which is shared for
the whole output file. So a bitstream filter specification applied to
multiple streams would not work correctly.
Anton Khirnov [Tue, 24 May 2016 14:36:16 +0000 (16:36 +0200)]
avconv: fix a check for av_bsf_get_by_name() return value
Anton Khirnov [Thu, 19 May 2016 17:08:06 +0000 (19:08 +0200)]
avconv_vaapi: use the hwcontext device creation API
Anton Khirnov [Thu, 19 May 2016 17:08:06 +0000 (19:08 +0200)]
avconv_dxva2: use the hwcontext device creation API
Anton Khirnov [Thu, 19 May 2016 17:08:06 +0000 (19:08 +0200)]
avconv_vdpau: use the hwcontext device creation API
Anton Khirnov [Thu, 19 May 2016 17:19:20 +0000 (19:19 +0200)]
hwcontext_vaapi: implement device creation
Anton Khirnov [Thu, 19 May 2016 17:19:20 +0000 (19:19 +0200)]
hwcontext_dxva2: implement device creation
Anton Khirnov [Thu, 19 May 2016 17:19:20 +0000 (19:19 +0200)]
hwcontext_cuda: implement device creation